FEBOND BLUE GRIT is ideal as a bonding coat for walls prior to plastering, for bonding to difficult substrates such as glass, ceramics, MR plasterboard, MDF, pre-cast concrete, and other particle boards etc.
Features and Benefits
· Provides mechanical Key - Enables plastering over low suction and smooth backgrounds
· Blue colour gives easy identification of area covered
· Simple to apply by roller or brush.
· Ready to use straight from the tub.
Preparation of Substrate
Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support.
STIR WELL BEFORE USE. Ensure ambient temperature is above 5 °C. Use 1 coat only. Apply using a short pile roller or brush to give an even coating. FEBOND BLUE GRIT is coloured blue to help avoid missing any areas.
Protect adjacent surfaces from splashes and remove any FEBOND BLUE GRIT before drying with warm soapy water.
Allow to dry thoroughly before applying plaster (usually 24 hours minimum). NOTE: drying time will be significantly extended at low temperatures.
Coverage approx. 4.5m2 per litre depending on porosity of substrate.