FEBOND BLUE GRIT 10ltr
FEBOND BLUE GRIT 10ltr
Couldn't load pickup availability
- Quick and easy to apply
- Natural, odourless material
- Ready to use
Febond Blue Grit is a high performance, plasterers grip coat bonding agent specifically designed to provide an improved key to smooth surfaces. Containing a fine aggregate, it provides a mechanical key to backgrounds such as plaster silcotex,glitter paints concrete, painted surfaces, textured surfaces and ceramic tiles. One coat application, coloured blue to indicate coverage.
Typical Uses
FEBOND BLUE GRIT is ideal as a bonding coat for walls prior to plastering, for bonding to difficult substrates such as glass, ceramics, MR plasterboard, MDF, pre-cast concrete, and other particle boards etc.
Features and Benefits
· Provides mechanical Key - Enables plastering over low suction and smooth backgrounds
· Blue colour gives easy identification of area covered
· Simple to apply by roller or brush.
· Ready to use straight from the tub.
Preparation of Substrate
Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support.
Application
STIR WELL BEFORE USE. Ensure ambient temperature is above 5 °C. Use 1 coat only. Apply using a short pile roller or brush to give an even coating. FEBOND BLUE GRIT is coloured blue to help avoid missing any areas.
Protect adjacent surfaces from splashes and remove any FEBOND BLUE GRIT before drying with warm soapy water.
Allow to dry thoroughly before applying plaster (usually 24 hours minimum). NOTE: drying time will be significantly extended at low temperatures.
Coverage
Coverage approx. 4.5m2 per litre depending on porosity of substrate.
Delivery
Delivery
How to Apply Silcotex
How to Apply Silcotex
1. Prep Your Mix
Shake the Silcotex pack and pour it into a plastic tub. Break up any clumps by hand—it may be compressed from packaging.
2. Add Water & Mix
Pour in 6–8 litres of warm (not hot) water.
Do not exceed this amount!
Mix thoroughly by hand for at least 50 minutes, or use a plaster drill for 25 minutes.
3. Let It Rest
Cover and let the mix rest for 20 minutes. After that, knead it one more time by hand to remove any remaining clumps.
4. Adjust if Needed
If needed, add up to 1 litre of extra water to make spreading easier.
5. Apply to Wall
Use a plastic trowel to apply a 2mm layer, working corner to corner. Stir the mix every 20 minutes to keep consistency.
6. Smooth & Finish
For best results, smooth the surface with a wet trowel as needed for up to 2 hours after application. Use side lighting to check for evenness.
Drying Time:
Allow 24–48 hours, depending on room temperature and humidity.
What You’ll Need:
- Silcotex pack
- Plastic tub
- Plastic trowel
- Warm water
Why Silcotex?
Quick and easy to apply
Transform your walls with ease and speed. Silcotex liquid wall coverings are designed for straightforward application, saving you time and effort. Achieve professional-looking results quickly, whether you're a DIY enthusiast or a professional decorator.
Natural, odourless material
Our liquid wall coverings are made from natural, odourless materials, ensuring a pleasant application process and a fresh, clean living space without any lingering smells.
Makes no joints
Say goodbye to unsightly seams and enjoy a flawlessly smooth finish. Silcotex liquid wall coverings create a continuous, joint-free surface, enhancing the aesthetic appeal of your walls and providing a sophisticated, high-end look that traditional wallpapers can't match.
Very elastic materialery elastic material
Experience exceptional durability and flexibility. Silcotex's highly elastic formula allows the wall covering to adapt to minor movements and imperfections in your walls, reducing the risk of cracking or tearing and ensuring a long-lasting, beautiful finish.
